Filling Bell Assemblies

Filling Bell Assemblies

Disposable filling bell in assemblies are designed for single-use applications and provide the benefits of  labor and cost saving. Avoid assembly, cleaning, sterilization and validation of reusable filling bells and the hazard associated with glass filling bells.

filling bell assemblyCellon’s filling bell is manufactured from medical grade USP Class VI Polycarbonate (PC) and is free of animal derived components (ADCF).  The filling bell was developed specifically for use in the biotech / biopharma applications. It is both gamma radiation stable and autoclavable.

The filling bell’s are manufactured under ISO13485:2003 and ISO 9000:2000 in a cleanroom facility that is in compliant with BSENISO14644 which is monitored for particulate and bioburden in accordance with this standard and meets the requirements for a class 8 (100,000) clean room.

Manufacture of filling bell assemblies and final packaging, is carried out within an ISO 14644-1 Class 7 cleanroom facility operated under ISO 9001:2008 and ISO 13485:2003 quality systems

Dimensions:

PharmaTainer PC Filling Bell
PC filling bell
  • Bell ID: 82mm
  • Bell Height: 63 mm
  • Shaft OD/ID: 10 mm/5 mm
  • Shaft Length: 29 mm above bell

Specify Your Assembly

Filling bell assembly-2bells

Tubing: Silicone or TPE tubing (C-FLEX®, PVC, Pharmed®, etc.)
Tubing Clamps: number and position.
Filters: specify by manufacturer’s part number (all brands)
Connectors: Such as MPC, Luer, swabable connector, aseptic connectors or none (for heat-sealing).
Packaging: Choose units per inner pack, number of inner packs per over pack, etc.
Irradiation: if specified, typical dose in 25-40 KGy.